If your 2021 Gulf Stream Vintage Cruiser Travel Trailer is pre-wired for the Drive Wireless RV Backup Camera System Item # 324-000002 it will be a simple plug in application. Since your camper is pre-wired there should be a mount on the back. Remove the face plate which should expose the plug for the camera. If there is not a mount there should be a cover over a hole with the plug in it. The camera comes with a wall mount. Simply plug the two ends together and mount the camera. Plug the... view full answer...
The camera pre-wiring on newer campers is basically just a power wire ran from the trailer running light circuit and a ground wire present on a connector that will easily plug into a specific brand camera. You can easily remove the connector and wire the remaining wires to the camera and you'd be set. view full answer...